Aero Fluid Service also deals with the distribution of coolant handling and maintenance equipment such as:
MIXERS
T-MIX 11 B
It is used to mix water-soluble concentrates in fluently adjustable concentrations up to 20%. The device is intended for direct installation on a standard steel barrel in the threaded hole G2 "i ľ". The telescopic suction tube guarantees use for different barrel sizes. The mixing valve is equipped with quick couplings that allow fast and convenient barrel replacement, which is particularly appreciated by the operator. The T-MIX-11-B also has a vent valve for easy draining of the discharge hose, and also has a check valve to ensure rapid suction of the concentrate. The mixing valve is made of anodized aluminum alloy, stainless steel, and all other components of the mixing device are manufactured and coated to provide corrosion and oil resistance.
T-MIX 10 B
It is used to mix water-soluble concentrates in fluently adjustable concentrations up to 20%. The mixing valve is made of anodized aluminum alloy, stainless steel, and all other components of the mixing equipment are made and treated to ensure corrosion and oil resistance.
OIL SEPERS
BOS-E
The device is designed to remove separated fats and oils from metalworking fluids. It is also possible to use the device for tanks with an aqueous solution, where it is necessary to remove separated fats and oils from the surface. The device is equipped with speed control and also has a magnetic clamp. The individual parts of the device are made of materials that have been surface treated to make them resistant to corrosion and oil. The device is not suitable for liquids containing lye. The device is powered from a safe voltage source.
VACUUM PUMPS FOR SUCKING OIL FROM SURFACES
BARBAR - vacuum pump
Suitable for sucking liquid cartridges during replacement, breakdown or repair. It is also successfully used in machine tool cleaning. Thanks to the accessories supplied from BARBAR, it is possible to remove impurities from the surface of liquids, such as: oil, abrasive sludge, hydraulic oil in case of failure, etc. The BARBAR vacuum pump is used to pump liquids into an airtight container (e.g. a standard steel drum), which creates a vacuum and draws liquid into the container. The BARBAR unit is easy to use on a drum or device designed for delivery with a quick connector. The vacuum pump mounting adapter for “Gl” thread also includes mechanical suction shut-off, which stops suction and thus contamination of the vacuum pump or the environment. The vacuum pump is made of corrosion-resistant aluminum alloy, and all other components are manufactured and surface treated to ensure corrosion and oil resistance BARBAR can pump contaminated liquids with medium mechanical impurities.
REFRACTOMETERS FOR MEASURING CONCENTRATIONS
REFRACTOMETER 0-18 BRIX S
An ideal measuring tool for quick analysis of a mixture of water concentrations. It enables easy and accurate control of dilution with a prism with a much higher refractive index than the sample solution being tested.
DIGITAL REFRACTOMETER
Refractometer for determining the concentration of hydraulic and machining (coolant) emulsions. At the same time, the sample temperature is measured. Mobile, small and easy to use, with automatic temperature compensation. The hermetic casing allows it’s easy cleaning under running water.
CONCENTRATE LEVEL INDICATORS IN THE BARREL
The device is designed to signal the selected level of liquid in the tank/drum, which allows you to reduce the time of replacement of the tank/drum or to prevent downtime by setting the new tank/drum early.
We also offer filtration nonwovens for gravitational cleaning of the coolant from impurities.
